1) Spray NOMO Professional directly over the area affected by mold. Since the mold may already have spread invisibly, also spray the surrounding area (approx. 20-30cm).
2) Leave NOMO Professional to act for about 15-20 minutes so that the mold becomes inactive.
3) Then clean the infested area with water and a sponge, brush and/or pressure washer. In some cases, the mold will leave stains or residue. If a bleach or other product is used for removal, rinse very thoroughly to ensure no residue remains.
Allow the surface to dry completely before proceeding to step 4.
4) Reapply NOMO Professional to create an anti-mold barrier. Spray NOMO Professional on as a fine mist. Avoid dripping! Allow the product to completely.
Mold spores are microscopic and only become visible when individual spores accumulate. The microscopic particles are constantly moving through the indoor and outdoor air. For mold to grow, the spores must come into contact with moisture.
The application of NOMO Professional creates a hydrophobic barrier that prevents moisture from penetrating the surface, thus protecting mold growth.
The mechanical barrier consists of natural ingredients that are safe for humans and animals.
NOMO Professional is designed for all areas where mold has formed.
Safe and easy to apply without the need for special protective clothing or respirator.
100% effective against black mold and all molds on drywall, stainless steel, carpet, fiberglass, metal and all other surfaces.
Allows mixing with organic paints, sealants, etc. Does not discolor surfaces. Is harmless to stainless steel, aluminum and other metals.
Odorless after drying. The room to which it was applied can be used again immediately after drying.
Protects against mold growth on or in areas of high humidity, vents or equipment.
The MoldGuard products went through the ASTM G21 Fungal Defacement Test Protocol. They were found to be successful in the sustained removal of a wide range of fungal strains.
A detailed list of these, as well as further information, can be found in our detailed study.
NOMO Professional products are composed of a unique combination of completely safe, biodegradable ingredients. The individual ingredients can be found on the FDA list, for Generally Recognized as Safe (GRAS) products.
The fact that all ingredients can be found in various foods, food additives / supplements or over-the-counter medications, illustrates the safety of our products for humans and animals.
NOMO Professional products are absolutely safe for humans and animals.
When applied as prescribed and after complete drying, NOMO Professional is resistant to water and UV radiation.
The treatment of surfaces with NOMO Professional does not result in any changes or discoloration of paints or coatings.
Surfaces treated with NOMO Professional lose their protective barrier as soon as they are cleaned with chemicals such as chlorine, ammonia, hydrogen peroxide, among others. Furthermore, the protective barrier of NOMO Professional is removed by hard scrubbing or the use of high-pressure cleaners. In this case, it is necessary to reapply NOMO Professional.
Due to its water resistance, NOMO Professional can also be applied to surfaces exposed to liquids (e.g. in the shower).
Should these surfaces be cleaned with acid or bleach, NOMO Professional must be reapplied.